Auto Weld builds all types of rear housings from full Competition cars to Pro Street to customer's specifications to special "shoot-out" cars. They are completely jig welded. Special fixtures allow us to put all brackets into alignment with the center section. They are offered as simple as a narrowed bar housing to a fullly welded Competition rear housing, complete with brackets, brace, triangular support, fill and drain plugs, and made for the toughest applications and in any width, bolt circle, and brake register, (9" type only). AUTO WELD can build any housing in any stage of completion that you could possibly need.
MANY OPTIONS ARE AVAILABLE!
*HOUSING & AXLE COMBOS-MADE TO ORDER
HOUSINGS-4-LINK HOUSINGS-LADDER BAR
HOUSINGS-BRACE KITS-HOUSINGS BUILT TO
SPEC-SPOOL COMBO-AXLES-HOUSING
HARDWARE (ON THIS PAGE!!)
* BOLT-IN HOUSINGS
* REAR END PARTS
At AUTO WELD we use these New massive
and thicker aftermarket 9" Ford housings
cores. And also use the thicker and stronger 1/4" wall "DOM" tubing for the axle tubes.
Shown below.
Above is an example of the differences
between the smaller 3" diameter
axle tubes and the stronger
and larger 3 1/4" diameter axle
tubes. Both used are the beefy 1/4"
wall "DOM" steel tubing.
Some applications may require
using the smaller 3"
axle tubes, but for most of our
rears we use the stronger
3 1/4" axle tubes.
Here are a few tips so you can be
prepared BEFORE you order!!
 Don't let our "LOW PRICES" fool you!! All of our rears are welded in special fixtures for absolute accuracy. 100's SOLD 
Auto Weld's Housing and Axle Combo is STILL the best buy in the U.S.A.! Any width available!! INCLUDES: HOUSING, AXLES, BEARINGS, STUDS AND RETAINERS!! Discounted package price..$781.00 FEATURES: * NARROWED HOUSING WITH MOSER ENGINEERING RACING AXLES * ANY WIDTH * ANY SPLINE UP TO 35 * 40 SPLINE AVAILABLE AT AN ADDITIONAL $100.00 * ANY BOLT CIRCLE * SET UP FOR ANY 9" BRAKE REGISTER OPTIONS: ** AUTO WELD HOUSING & AXLE PKG. WITH BEARINGS, STUDS, RETAINERS COMBO...$781.00 (SAVE) ** AXLE BEARINGS- 3" STUDS, RETAINER PACKAGE...$99.00 ** AXLE BEARINGS- 5/8 STUD KIT, RETAINER PACKAGE...$160.00 ** 40 SPLINE...Additional $100.00 ** (LABOR ONLY) TO WELD ALL BRACKETS TO HOUSING 4-LINK & LADDER BARS...$299.00  ** 9" FORD (bare)HOUSING, ANY WIDTH,...$370.00 ** 9" FORD HOUSING, WITH BRACE INSTALLED...$480.00 NOTE: These prices only include up to 35 spline. 40 spline is available for 9" Fords for an additional $100.00  PRO STREET 4-LINK HOUSING  COMPETITION 4-LINK HOUSING  ** BRACE INSTALLED (PARTS & LABOR)...$110.00 ** 4-LINK BRACKETS & SHOCK MOUNTS INSTALLED (LABOR ONLY)...$299.00 ** COMPETITION 4-LINK REAR PREP, INCLUDES: FIXTURE WELDED REAR HOUSING, 4-LINK,BRACKETS,SHOCK BRACKETS,& SUPPORT BRACING, BRACE, AND DRAIN & FILL OPT. When purchased with supension kit...$799.00(discounted) Purchased outright...$849.00(discounted)  "COMPETITION" LADDER BAR REAR HOUSING   ** BRACE INSTALLED (PARTS & LABOR)...$110.00 (Pictured below) ** LADDER BAR BRACKETS & SHOCK MOUNTS INSTALLED (LABOR ONLY)...$299.00 ** COMPETITION (above) and PRO STREET (below) LADER BAR REAR PREP. INCLUDES: REAR HOUSING, LADDER BAR BRACKETS, SHOCK BRACKETS, & SUPPORT BRACING, REAR BRACE, AND DRAIN & FILL OPT. When purchased with suspension kit...$799.00 (discounted) Purchased outright...$849.00 (discounted) ROUND TYPE "PRO STREET" HOUSING WITH BRACE   **MUSTANG LADDER BAR HOUSING** If you want dynamite traction on your stock body Mustang, this is the rear for you. Housing is already fixture welded with all the mounts to ensure proper alignment (when using stock frame rails). Order with our "Ladder Bar Suspension Kits" and "Extreme Duty Frame Connectors" and save! TRACTION NEVER FELT SO GOOD!! PART#1464....MUSTANG LADDER BAR HOUSING..$$699.00 (when ordered with suspension kit) PART#1464...OUTRIGHT.....................$749.00    ** 9" BRACE KIT, FORD LEAF...$65.00 ** 9" BRACE KIT, FORD COIL...$65.00 ** 9" BRACE KIT, OLD STYLE...$65.00 ** 8-3/4" BRACE KIT, MOPAR ....$65.00 STOCK LENGTH (4pc) REAR BRACE (such as the SS9 Mustang)..$79.00    ** NARROW A HOUSING...$105 ** NARROW A HOUSING AND BLAST CLEAN TO BARE METAL, READY FOR PAINT...$195 ** ADD FILL & DRAIN (FILL CAP IN ALUMINUM)...$55.00 ** ADD BACK BRACE (MADE FROM BOX TUBING)...$110.00 ** STOCK LENGTH REARS..$125.00 ** MOUNT 4-LINK BRACKETS AND SHOCK MOUNTS (LABOR ONLY)...$299 ** MOUNT LADDER BAR BRACKETS AND SHOCK MOUNTS (LABOR ONLY)...$299 ** LABOR IN MOUNTING ANOTHER COMPANY'S 4-link or ladderbar, shock brackets, and supports to housing.............$550 ** LEAF SPRING PADS INSTALLED...$45.00 ** GM LEAF SPRING PADS INSTALLED...$85.00   AUTO WELD'S 9" HOUSING, RACE AXLE, AND SPOOL COMBO IS PRACTICALLY A STEAL!! GET THIS SPECIAL DISCOUNT PRICE WHEN ORDERING HOUSING, AXLES, BEARINGS, STUDS, RETAINERS, AND SPOOL. **ONLY...$942.00(Discounted)   Axle shown with the "Star Flange" and "Gun Drill" options. **Star Flange Option...$50.00 per pair **Gun Drill Option...$100 per pair NHRA-IHRA LEGAL RACING AXLES Special tempering makes them ideal for Pro Street also! We like Moser Engineering Axles because they are super tough for racing, they come with a fantastic warranty, and the hubs are tempered in such a way that you can safely drive with them on the street.  ** FORD 9"-28 SPLINE...$315.00 ** FORD 9"-31 SPLINE...$315.00 ** FORD 9"-33 SPLINE...$315.00 ** FORD 9"-35 SPLINE...$315.00 ** FORD 9"-40 SPLINE...$315.00 ** CHEVY 12 BOLT-30 SPLINE...$315.00 ** CHEVY 12 BOLT-33 SPLINE...$315.00 ** DANA 60-35 SPLINE...$315.00 ** MOPAR 8-3/4-30 SPLINE...$315.00 ** MOPAR 8-3/4-35 SPLINE...$315.00 NOTE: YOU MUST SPECIFY THE LENGTH OF AXLES, BOLT CIRCLE, & BRAKE REGISTER. IF YOU NEED ASSISTANCE, AUTO WELD TECHS ARE ALWAYS AVAILABLE AND MORE THAN HAPPY TO HELP!!!   
** AXLE BEARING- 3.150 END, 1.772 BORE (EACH)...$34.95 ** AXLE BEARING- 3.150 END, 1.531 BORE (EACH)...$34.95 ** AXLE BEARING- 3.150 END, 1.563 BORE (EACH)...$34.95 ** AXLE BEARING- SMALL FORD, 2.893 END,1.563 BORE (EACH)...$34.95 ** AXLE BEARING- SMALL FORD, 2.893 END,1.378 BORE (EACH)...$34.95 ** AXLE BEARING- SMALL FORD, 2.893 END,1.531 BORE (EACH)...$34.95 ** AXLE BEARING- GM C-CLIP ELIMINATOR WITH STOCK AXLES...$150.00 ** AXLE BEARING- MOPAR, 1.562 BORE WITH RETAINER PLATE...$34.95 ** BIG FORD BEARING RETAINER PLATE (PIECE), NEW STYLE 3/8" HOLES...$8.00 (shown above) ** BIG FORD BEARING RETAINER PLATE (PIECE), OLD STYLE 1/2" HOLES...$8.00 ** AXLE BEARINGS, 1/2" X 3" STUDS, RETAINER PKG...$99.00 (shown above) ** AXLE BEARINGS, 5/8" STUDS, RETAINER PKG...$160.00 NOTE: AXLE BEARINGS-3" STUDS- RETAINER PKG. IS ONLY $99.00 IF PURCHASED WITH NEW AXLES. IF NOT, YOU MUST CALL FOR SPECIAL PRICE.    IF YOU WANT KILLER STRENGTH IN YOUR WHEEL STUDS, THIS IS THE KIT FOR YOU!! ** PRESS-IN STUD KIT, 1/2x20x3, .615 KNURL...$27.95 ** PRESS-IN STUD KIT, 7/16x3, .480 KNURL...$27.95 ** PRESS-IN STUD KIT, 1/2x20x3, PACK OF 10...$27.95 ** 5/8" STUD KIT...$83.00 (bottom picture above)   FEATURES A BRIGHT CHROME FINISH FOR A CLEAN PROFESSIONAL LOOK!! ** 1/2x20 OPEN END (FOR LONG STUDS), 10 EACH WITH THICK WASHERS...$27.00 ** 7/16x20 OPEN END (FOR LONG STUDS), 10 EACH WITH THICK WASHERS...$27.00 |