The SUPER STANG 9" features a 9" Ford
housing with fully adjustable links.
All links have right an left hand
threads, which makes changing pinion
angle and setting the preload a breeze.
Bottom links are now independent from
the coil springs (the way it should be!)
New bracketry makes it easy to change
the instant center of the suspension,
(just like its Drag 4-link counterpart.)
36 COMBINATIONS IN ALL!! No need to cut
up your Mustang to get a fully tunable
suspension. It's a bolt-in transplant with
the exception of reaming out the metric
holes in the body brackets to 5/8."
Stock springs are utilized along with the
stock shocks to make this a truly
economical setup.

Top links feature solid stainless steel/
urethane bushed adjusters, and bottom links
use rod ends-standard! This baby hooks!!!
Added benefit-car will feel firmer when
going around corners.








STANDARD PACKAGE INCLUDES: A
NEW more massive and thicker aftermarket
jig welded 9" Ford housing, the
stronger 3 1/4" x 1/4" wall DOM
steel axle tubes, 4-link
control arms with all hardware
including rod ends, adjusters,
spacers, and bolts.
(COMPLETELY COMPLETE!!)

PREMIUM PACKAGE INCLUDES: Std.
Package plus Moser racing axles,
brgs-studs-ret. pkg.
(SAVE compared to
purchasing separately!!!)










THIS IS THE ONE SOME OF THE FASTER
"SHOOT OUT" CARS HAVE BEEN USING!








THESE ARE EXTRA VIEWS OF OUR CHAMPIONSHIP
WINNING "SUPER STANG 9" AS IT WAS BEING
PREPPED FOR "MUSCLE MUSTANGS AND FAST FORD"
MGAZINE. HOUSING BRACE, FILL & DRAIN AND POWDERCOAT OPTION
SHOWN. THIS REAR PACKAGE HAS BEEN
FEATURED IN OTHER MAGAZINES AS WELL.



SUPER STANG PUTS ALL OTHER BOLT-IN SYTEMS TO SHAME!!

** 79-98 Mustang Standard Pkg...$999.00
** 79-98 Mustang Premium Pkg...$1354.00
** 99 & up Mustang, mid 80s
Thunderbird Standard Pkg...$999.00
** 99 & up Mustang, mid 80s
Thunderbird Premium Pkg...$1354.00
** Back brace option...$125.00
** Drain and fill option...$55.00


!! COILOVER VERSIONS ARE AVAILABLE
UPON REQUEST. GIVE US A CALL!!!

Designed after the Super Stang 9", the Super
Stang 8.8 is easy to install and is believed
to be the best hooking bolt-in suspension
anywhere! It is fully adjustable for pinion
angle, preload, and instant center. Where other
manufacturers lack..the Super Stang excels!!!

As with the Super Stang 9", the lower control
arm is isolated from the coil spring mount as
it should be for better traction and handling.
Also, by doing this, it allows the lower
control arms to be fully adjustable for instant
center without changing ride height. The Super
Stang 8.8 is offered in two version. Either a
control arm kit with brackets and hardware
included or a complete suspension kit including
top contol arms, lower control arms, and bracket
kit. (housing not included although shown
in the picture!)

THIS KIT WILL WORK IN MUSTANGS 79-99,
MID 80S THUNDERBIRDS, FAIRMONTS,
KIT CARS, STREET RODS,
AND ANYTHING THAT USES AN 8.8.
****
Many have been used in "FACTORY 5"
Coba kit cars to correct "wheel hop".






** TOP CONTROL ARM KIT...$259.95
** LOWER CONTROL ARM KIT...$299.95
** COMPLETE PKG...$509.95 (discounted)

!!! 7.5 SUPER STANG ALSO AVAILABLE
UPON YOUR REQUEST !!!







Top Control Arm Kit
(housing not included)






Complete Package
(housing not included)






INSTALLATION PROCEDURES:

1.) Grind bolt clearance on bottom
brackets as shown below.

2.) Bolt brackets to housing.

3.) Weld brackets to housing-(recommended)

4.) Drill metric size holes out to 5/8"
in each of the control arm brackets
under the floor.

5.) Bolt into car.

ALL OF OUR HOUSINGS ARE BUILT
IN PRECISE WELDING JIGS FOR
PERFECT ALIGNMENT. THEY FEATURE:
A NEW MASSIVE AND THICKER CORE WITH
THE STONGER 3 1/4" X 1/4" THICK
DOM STEEL AXLE TUBES, NEW HEAVY
DUTY URETHANE BUSHINGS
ARE INCLUDED ON TOP. YOU CAN
PURCHASE EITHER THE HOUSING
ONLY OR A HOUSING !PLUS! MOSER
AXLES AND A BEARING-
STUD-RETAINER PKG.





79-98 MUSTANG

** HOUSING ONLY...$504.95
** HOUSING, MOSER AXLES,
BRNG-STUD-RET. PKG...$879.95








99 & UP MUSTANG AND THUNDERBIRDS

** HOUSING ONLY...$504.95
** HOUSING, MOSER AXLES,
BRNG-STUDS-RET PKG...$879.95

THESE REAR CONTROL ARMS
ARE USED WHEN ADJUSTING
PINION AND CHASSIS
PRELOAD. COMES COMPLETE
WITH ALL NECESSARY
HARDWARE.
!!BUY ADJUSTABLE CONTROL ARMS
FOR THE SAME PRICE AS
NON-ADJUSTABLE!!




** UPPER REAR CONTROL ARMS...$179.95
(left picture)

** LOWER CONTROL ARMS...$249.95
** UPPER & LOWER CONTROL ARM PKG...$409.95
(right picture)

GM HI-TRAC 9
HOOK IT!! THIS IS THE PERFECT SUSPENSION FOR YOU "SHOOT-OUT" RACERS THAT HAVE BIG HORSE POWER WITH THOSE SKINNY 10" TIRES!!
NO OTHER SUSPENSION "HITS" LIKE THIS ONE!!

If you want the adjustability of an all out
drag car, but you don't want to cut up the
car, this is the suspension for you. It's
fully adjustable! Each suspension tube
has right and left threads so you can
adjust the pinion angle and preload
without removing the links. The instant
center can be adjusted just like a drag
4-link car, so you can make the tires
"hit" as hard as needed. This baby
HOOKS!! Bolts into stock position
utilizing stock shocks and springs,
making this a truly economical set-up!!
Just ream out the control arm bracket
holes to 5/8" and everything
bolts right up! Comes with Moser racing
axles, bearing, studs, and retainers.

NOTE: WHEN ORDERING, PLEASE SPECIFY
EXACT YEAR OF YOUR PRIZED VEHICLE!!




STANDARD KIT INCLUDES:
A new massisve and thicker aftermarket 9" Ford Housing, 3 1/4" x 1/4" DOM steel axle tubes, Moser race axles..up to 35 spline..(40 available), 3" axle studs, bearings and retainers, and all 4-link parts and hardware.

** 64-72 CHEVELLE CUTLASS GTO...$1354.00
** 73-77 MALIBU, MONTE CARLO, CUTLASS...$1354.00
** 78-87 MONTE CARLO, CUTLASS, GRAND
NATIONAL, MALIBU...$1354.00
** HOUSING ONLY AND 4-LINK PKG...$999.00
(for above)

'82 to '93 Camaro



'94 to '97 Camaro
and
'98 to '02
ALREADY DEVELOPED !!
WILL BE LISTED SOON!

If you want the ultimate in susp. and traction
control, this is the setup for you. Features new
heavy-duty trans-crossmember and will accept early
model transmissions. Heavy-duty torque arm won't
bend and twist like a stock unit and this creates
better traction control. Two rod ends at the back
of torque arm make this setup fully adjustable.





** Housing & axle, bearings, studs,
retainer pkg...$879.95
** New adjustable torque arm...$394.95
** New adjustable transmission
crossmember...$139.95
** New third mount...$149.00 (shown below)
(TORQUE ARM MOUNT)







NOTE: Third mount enables you to
use your existing torque arm. Also
makes your existing torque
arm fully adjustable.

** New Track Locator Kit...$54.95

NOTE: Track locator kit allows you to turn your
existing track bar into an adjustable one so
you can adjust the rear and put it
exactly on center.


!! WE ALSO HAVE TWO KITS FOR '82-'93 !!

** 82-'93 CAMARO, TRANS-AM
(COMES WITH TORQUE ARM MOUNT)...$980.00
(discounted)
** 82-'93 CAMARO NEW FULLY ADJUSTABLE
SUSPENSION/REAR PKG...$1424.00

All GM "BOLT-IN" replacement housings
feature: a New massive and thicker
aftermarket 9" Ford housing, the
stronger 3 1/4" x 1/4" DOM steel
axle tubes, special fixture welded,
with all brackets and special
polyurethane bushings on top.
Comes with Moser race axles, bearings, studs,
and retainers.




NOTE: PLEASE SPECIFY EXACT YEAR OF THE
VEHICLE WHEN ORDERING!! THANK YOU.

** 64-66 CHEVELLE CUTLASS GTO HOUSING...$504.95
** 64-66 CHEVELLE CUTLASS GTO H&A PKG...$879.00
** 67-72 CHEVELLE CUTLASS HOUSING...$504.95
** 67-72 CHEVELLE CUTLASS H&A PKG...$879.00
** 73-77 MALIBU MONTE CARLO HOUSING...$504.95
** 73-77 MALIBU MONTE CARLO H&A PKG...$879.00
** 78-87 MALIBU MONTE CARLO HOUSING...$504.95
** 78-87 MALIBU MONTE CARLO H&A PKG...$879.00








64-72 CHEVELLE






78-87 MONTE CARLO

WE HAVE 4-BAR ONLY!
***
THE HOUSING AND AXLE
COMBO FEATURES: A NEW
MASSIVE AND THICK AFTERMARKET
9" FORD FIXTURE WELDED
HOUSING, THE STRONGER
3 1/4" X 1/4" DOM STEEL AXLE
TUBES, MOSER RACE AXLES,
BEARINGS, STUDS, &
RETAINERS. ANY SPLINE
UP TO 35, AND SET UP
FOR ANY BRAKE SYSTEM.


** HOUSING ONLY...$514.95
** H&A PACKAGE...$889.95

GM ADJUSTABLE UPPER CONTROL ARMS
________________________________


-USED WHEN ADJUSTING PINION
AND CHASSIS PRELOAD. WHY
PURCHASE NON-ADJUSTABLE
CONTROL ARMS, WHEN YOU
CAN HAVE THE FULLY ADJ.
TYPE FOR THE SAME PRICE?!
THIS INCLUDES ALL
NECESSARY HARDWARE.


** 64-67 CHEVELLE,GTO,CUTLASS...$179.95

** 68-72 CHEVELLE,GTO,CUTLASS...$179.95

** 73-77 MONTE CARLO,
CUTLASS,MALIBU...$179.95

** 78-87 MONTE CARLO,
CUTLASS,GRAND NATIONAL...$179.95











GM ADJUSTABLE LOWER CONTROL ARMS
_______________________________


-USED WHEN ADJUSTING PINION
AND CHASSIS PRELOAD. COMPLETE
WITH ALL NECESSARY HARDWARE.
DUE TO DIFFERENT LENGTHS
MADE FOR GM CARS, YOU MAY
HAVE TO PROVIDE THE HOLE-
TO-HOLE DIMENSIONS FOR THE
BEST POSSIBLE ACCURACY.


** 64-67 CHEVELLE,
GTO,CUTLASS...$299.95

** 69-72 CHEVELLE,
GTO,CUTLASS...$299.95

** 73-77 MONTE CARLO,
CUTLASS,MALIBU...$299.95

** 78-87 MONTE CARLO, CUTLASS,GRAND NATIONAL...$299.95

***
Standard units come with the poly type rod ends. CROMOLY rod ends are available for additional price.

New adjustable control arms to convert an
early 68-72 12-bolt coil spring rear to the
later 78-87 gm cars with a special offset
design. Kit includes upper control arms
and new coil spring mounts.
THE PERFECT CONVERSION!!







** ONLY...$194.95

All the features and benefits of our other
9" Ford rears....A New massive and thick aftermarket 9" Ford housing, The stronger
3 1/4" x 1/4" DOM steel axle tubing
Built specifically for the
vehicles listed below. Includes leaf spring
pads already welded in place. Housing pkg.
includes: jig welded housing only. Housing
and axles packages include: jig welded
housing, plus you get Moser race axles,
bearings, 1/2"x3 axle studs, and retainers.

!! OTHERS TYPES AVAILABLE
FOR MOPARS & FORDS.





** 66-67 NOVA HOUSING...$484.00
** 66-67 NOVA H&A PKG...$854.00
** 67-69 CAMARO HOUSING...$484.00
** 67-69 CAMARO H&A PKG...$854.00
** 70-81 CAMARO HOUSING...$484.00
** 70-81 CAMARO H&A PKG...$854.00
** S-10 HOUSING...$434.00
** S-10 H&A PKG...$815.00
** 65-66 MUSTANG HOUSING...$434.00
** 65-66 MUSTANG H&A PKG...$815.00
** 67-70 MUSTANG H&A PKG...$815.00
** 67-70 MUSTANG H&A PKG...$815.00