Variety of Mounts

 

 

***COIL OVER MOUNTS***

***

PRO STREET UPPER MOUNTS

–This is for urethane bushed shocks with 5/8″ hole eyelets. Some drilling is required.–
***PRO STREET UPPER COILOVER MOUNT
CROSSMEMBER,30″ LONG    above
Part#7203…….$49.50   
***
*PRO STREET UPPER COILOVER MOUNT
CROSSMEMBER,36″ LONG     above
Part#7204…….$50.50

COMPETITION UPPER MOUNTS

–To be used with special rod end type coilovers.–
***COMPETITION UPPER COILOVER
MOUNT CROSSMEMBER,STD.
30″ LONG with 1/2″ holes.
Part#7205…….$45.50   above
***
*COMPETITION UPPER COILOVER
MOUNT CROSSMEMBER,
36″ LONG with 1/2″ holes.
Part#7206…….$46.50    above
******
*PRO STREET COILOVER MOUNT
CROSSMEMBER, STNDRD 30″ LONG,5/8″HOLES
Part#7207…….$42.90    above
***
*PRO STREET COILOVER MOUNT
CROSSMEMBER,36″ LONG,5/8″ HOLES
Part#7208…….$47.95   above
ADJUSTABLE LOWER COILOVER MOUNT
–This is to be used with a brace and has approx.
4″ adjustment. ZINC coated tabs.
**ADJ. LOWER COILOVER MOUNT   above
Part#7210…….$85.90

STD. LOWER COILOVER MOUNT
–Approx. 4″ of adjustment–LOWER COILOVER MOUNT
Part#7211…….$85.90    above
“WIDE” STD. LOWER COILOVER MOUNT
–Approx. 4″ of adjustment.–WIDE” LOWER COILOVER MOUNT
Part#7213…$89.95    above
LONG “WIDE” LOWER COILOVER MOUNT
–Approx. 6″ of adjustment.–LONG “WIDE” LOWER COILOVER MOUNT
Part#7214…….$95.95    above
LONG LOWER BRACE COILOVER MOUNT

–For installation with a rear housing brace.–LONG LOWER COILOVER MOUNT
Part#7215…….$95.95   above
ADJUSTABLE FRONT COILOVER MOUNT
–!!NEW!!NEW!! This is for front coilover installation. Fits on to 2×3 box steel frame
(can be modified for other), Makes ride height adjustable, with Zinc
coated tabs.This mount is used on our “Featherweight”
front clips.–ADJ. FRONT COILOVER MOUNT
Part#7216…….$96.95   above

NEW …LOWER COILOVER MOUNT 

This mount is for leaning the top of the coilover inboard at the top.

…goes with part#s 7203 and 7204 crossmember kits.

Mount features three 5/8″ holes for adjusting the height of your build with a

spacer with special strength reinforcement . Comes with grade 8 bolts and all hardware. 

Part #7217……$129.95 pr….above

***********

LONG LOWER COILOVER MOUNT

These Mounts are designed to “HUG” the back of the housing 

…such as our Standard #7211 mounting kit ….where there is NOT a

Rear Brace installed such as a 12Bolt Chevy or a Dana 60 housing.

Features 6″ of height adjustment.

Part #7218…………………$92.95    above

********