WISHBONE TRACK LOCATORS: Look just like a wishbone. They are the best for all 4-link applications whether competition or pro street. They keep your rear on center but do not put a load on the 4-link, such as with a diagonal type, and work independently of the 4-link. This type is used not only in drag racing but in other motor sports as well. Our wishbone track locators come standard with space-age plastic snap-in bushings. No metal to metal and no greasing. Easily replaced too!!
DIAGONAL TRACK LOCATOR: This is situated between ladder bars in a diagonal position (as illustrated
in our ladder suspension kit.) For competition use only! Watch out!! Unlike our mega quality locators, some track locators can bend!!!
PANHARD BAR TRACK LOCATOR: This is a link that is fastened to the frame on one side of the car and
runs to the opposite side while being fastened to the rear, (used by most car manufacturers on cars with coil spring suspensions.) Some chassis builders are offering panhard bars for pro street applications. If it's not bad enough using competition ladder bars on the street, the problems are made even worse when using a panhard bar in conjunction with them!! Since a panhard bar works on an arc, it actually pulls the rear from side to side when it moves up and down. If you have competition ladder bars with solid rod ends in the back, the panhard bar is actually trying to pull them in a manner in which they are not designed to move, actually causing a binding effect. The result is a harsh ride, maybe a broken part. The only way you should use a panhard bar with ladder bars is if the ladder bars are urethane bushed and panhard bars are also urethane bushed, such as in our pro street kits. This allows the rear to work in conjunction with the panhard bar.
PRO STREET WISHBONE TRACK LOCATOR
*CUSTOM PRO-STREET WISHBONE*
-GREAT FOR PRO STREET, STREET ROD, AND NOSTALGIA. CUSTOM BUILT PER ORDER. THIS TRACK LOCATOR IS MUCH LIKE THE COMPETITION MODEL ACCEPT MADE WITH THICKER TUBING FOR STREET USE.
(dimensions to be supplied by customer)
COMPETITION WISHBONE TRACK LOCATOR
FORWARD OR REVERSE DESIGN. ROD ENDS PROVIDE VERY POSITIVE TRACK LOCATING. WELDED OR UN-WELDED-
(welded..dimensions to be supplied by customer)
* "UNWELDED" version,
-QUIET!! AND REPLACABLE TOO!! NO GREASE. FEATURES LONG WEARING SPACE-AGE PLASTIC SNAP-IN BUSHING. STANDARD ON ALL OF OUR WISHBONE TRACK LOCATORS.-
(an AUTO WELD exclusive!)
"WELD-ON TRACK LOCATORS"
Includes all hardware,weld-in threaded bungs,rod ends,etc.
-DIAGONAL TRACK LOCATOR KITS USED IN DIAGONAL CONFIGURATION BETWEEN COMPETITION LADDER BARS AND 4-LINK SUSPENSION. KEEPS REAR HOUSING LOCKED ON CENTERLINE THROUGH SUSPENSION TRAVEL. NOT RECOMMENDED FOR STREET DRIVEN CARS AND TRUCKS!!-
*part#7330.. 30" LONG, ONLY...$98.50
*part#7331.. 36" LONG, ONLY...$99.50
BOLT-ON TRACK LOCATOR
-This locator can be used on our competition ladder bar kit OR our competition 4-link kit.-
(MUST SPECIFY using ladder bar or 4-link)
*part#7332.. DIAGONAL KIT, 30" LONG...$103.50
*part#7333.. DIAGONAL KIT, 36" LONG...$104.50
PRO STREET PANHARD BAR
-Can be used with any suspension type, including Pro Street Ladder Bar, all 4-links, and EVEN OEM type suspenions. Very positive and strong!!-
*part#7334.. 30" LONG, ONLY...$106.50
*part#7335.. 36" LONG, ONLY...$107.50
"PRO WHEELIE BARS"
**CUSTOM WELDED PRO "K" FRAME**
**STANDARD AXLE TYPE**
PRO "K" FRAME WHEELIE BARS (above)
*Light Weight Chrome Moly Tube Construction
*Height Adjustment (coarse and fine)
*Spring Load Ajustment
*4" (ball bearing)Wheels
* Any Width (main body completely welded)
*Wheelie bars (plain finish)
*Wheelie bars (powder coated)
OUR AXLE TYPE WHEELIE BARS COME W/"EXTRA" LOW PROFILE BRACKETS. 48" OR 54" LENGTHS,
SPRING LOADED, FULLY ADJUSTABLE, PLAIN OR POWDERCOATED, AND ALL CHROMOLY TUBE
Wheelie bars (plain)
Wheelie bars (powder coated)
UNIVERSAL TRANSMISSION CROSSMEMBER KIT
2x3 RECTANGLE & 1 3/4 ROUND
-FOR CUSTOM INSTALLATION!! GREAT
FOR CUSTOM BUILDING A CHASSIS.-
2x3x11ga STELL TUBE CROSSMEMBER
Not from the .083 wall "chintzy" stuff!!
** 2X3 X-MEMBER,3" DROP
** 2X3 X-MEMBER,2-1/2" DROP
OTHER DROPS AVAILABLE!
1 3/4" ROUND STEEL TUBE CROSSMEMBER
3 1/4" drop, Part# 7520....$64.95
BOX TYPE LADDER BAR XMEMBER KITS
-FOR CUSTOM INSTALLATION. COMPLETE WITH 2X3 BOX STEEL TUBE XMEMBER, BRACKETS, BOLTS, & HARDWARE.-
** PRO STREET(W/LONGER BOLTS)
ROUND TYPE LADDER BAR XMEMBER KITS
-USED IN ALL OF OUR LADDER BAR KITS.
1-3/4 X .134 WALL TUBE, BRACKETS, BOLTS, & HARDWARE.-
** PRO STREET(W/LONGER BOLTS)
-FOR RACE CHASSIS AND CUSTOM APPLICATIONS. POWDERCOATED.
-INCLUDES ALL HARDWARE AND ALUMINUM MASTER CYLINDER PUSH ROD.-
BRAKE AND CLUTCH PEDAL COMBO
-FOR RACE CHASSIS AND CUSTOM APPLICATIONS.
INCLUDES ALUMINUM MASTER CYLINDER PUSH ROD. POWDERCOATED.-
WELD-IN BATTERY MOUNT
-DESIGNED FOR DRAG RACING. COMPLETE WITH 3/8" LEGAL BOLTS AND SAFETY LIP FOR INCREASED BATTERY STABILITY.-
** RH-MOUNTS ON PASSENGER SIDE FRAME
** LH-MOUNTS ON DRIVER SIDE FRAME
CHEVY MOTOR MOUNT
-FOR STREET RODS OR CUSTOM APPLICATIONS.
SET INCLUDES (2)INSULATORS AND (2) UNIVERSAL STEEL MOUNTING BRACKETS.-
FILL AND DRAIN PLUG KIT
-THESE LITTLE GEMS CAN BE USED ON VIRTUALLY ANY REAR HOUSING TO FILL AND DRAIN WITHOUT HASSLE!!!-
*part#7551.. FILL BUNG AND CAP...$45.95
*part#7552.. DRAIN BUNG AND PLUG...$22.95
*part#7553.. FILL AND DRAIN COMBO...$66.70