*LADDER BAR SUSPENSION KITS
*"NOSTALGIA" LADDER BAR KIT
*PRO STREET LADDER BAR KIT
*LADDER BAR JIG WELDED ASSEMBLY

INCLUDES:

* 32" OR 36" powder coated ladder bars (your choice)
* Series 7000 coilovers (your choice
of spring rate)
* Shock crossmember
* Track locator
* Front Ladder Bar crossmember and mounts
* All hardware (complete) as shown

OPTIONS:

* COMPETITION VERSION Part#2025......$894.95
**
* PRO STREET VERSION Part#2026......$903.95
**
* COMPETITION VERSION-LADDER  BARS W/OPTIONAL RECTANGULAR TUBE CROSSMEMBER  Part#2027......$953.50
**
* PRO STREET VERSION-LADDER BARs W/OPTIONAL RECTANGULAR TUBE CROSSMEMBER Part#2028......$965.50
**


--DOUBLE ADJUSTABLE ONLY--


back to top

INCLUDES:

* Nostalgia Ladder bars, approx. 45" long
* Series 7000 coilovers (your choice of spring  rates up to 250# per inch)
* Panhard bar kit
* Powdercoated

**Built for heavy duty operation when you want performance looks of the early days.
**Materials used are of the same high quality as that of Pro Street ladder bars.

FOR HOT RODS, STREET RODS, & NOSTALGIA DRAG CARS & TRUCKS Part#2029......$999.50
**
"COILOVER UPGRADE" on all of our kits
**
Aldan (single adjust) Part#7065......$195.00
**
Aldan (double adjust) add......$320.00
**
QA1 (single adjust) add......$215.00
**
QA1 (double adjust) add......$355.00

back to top

This is the most popular Pro Street suspension there is!!! It is reliable, strong, and smoother riding that its competition counterpart!! AND it is still drag race worthy with some of our customers running 8 and 9 seconds in the 1/4 mile.

All of the suspension is included in this kit, as with all of our kits, and there is no need to buy anything else!! Note: Shown/pink color is for display purposes only...ladder bars are powdercoated 007 Silver STD.


PRO STREET LADDER BAR SUSPENSION KIT
Part#2026......$903.95

back to top

LADDER BAR REAR FRAME CLIP

**TYPICAL SIDEVIEW OF REAR FRAME**
...........**Ladder Bar**..........
(Dimension "B")......(Dimension "A")
Competition.32"..............33 7/8"
Competition.36"..............37 7/8"
Pro-Street..33"..............34 7/8"
*

The above drawing based on a 32"dia. tire

***
*LADDER BAR REAR FRAMES*
All of our frames are welded in a special fixture for accuracy. The rails are 2x3x11ga and 2x4x11ga  mandrel bent steel tubing with smooth bends using our "NO WRINKLE TECHNOLOGY". And has the suspensionbrackets pre-welded for accuracy.
**


*NOTE*
ALSO AVAILABLE: FRAME with "rear stubs" detached for easy installation.

(see "Fairlane Project" for installation of these stubs)
***

2X3 WELDED REAR FRAME
Part#2035...Low as...$1067.95

2X4 WELDED REAR FRAME with "Oval" crossmember included
Part#2037...Low as...$1533.95

Maximum strength is built into all of our products. Note the welded area of the brackets. This creates
more strength in this area. Also note the smooth bends in the tubing.
**
2x3 Competition clip (above)
**
2x4 Pro-Street clip (below)

****
*LADDER BAR REAR CLIPS*
Both 2x3 and 2x4 Fixture Welded !!

*NEW "GASSER" REAR CLIP*
above
***
FEATURES:
* 13" Rocker panel height when using 28"-29" diameter tires!!
* Frame rails are extra long in the rear of the frame. This allows for moving the axle ahead  when building an "altered wheelbase".
Gasser.....$3351.00
Moser axles included !

INCLUDES:
* Jig welded frame member with all brackets fully welded
* Ladder bars (your choice)
* Series 7000 coilovers (your spring rate choice)
* Track locator
* Frame "connector" material(std.) and "rear stubs" (two piece rail...by request...
shown above)to complete your project from the front frame rails to the rear bumper.

NOTE: You must specify spring rates!! Up to 250# per inch available at no extra charge. Above 250#per inch must call for ordering and
pricing.

PRICES: discounted!!

* COMPETITION
(rear housing not included)
Part#2030......$1810.00
***
* PRO STREET
(rear housing not included)
Part#2031......$1821.00
***
*GASSER/ALTERED
(rear housing not included)
Part#new.......$1880.00
(SHOWN IN ABOVE PICTURE)


* INCLUDING HOUSING... New thicker and stronger fixture welded  aftermarket 9" Ford  housing with 3 1/4" x 1/4" DOM steel axle tubes, Moser axles, bearings, long studs, retainers, and with all brackets jig welded on housing!!

THIS ITEM IS DISCOUNTED!!!
COMPETITION Part#2033......$3280.00
PRO-STREET.................$3292.00
GASSER/ALTERED.............$3351.00
**
COILOVER UPGRADE
using "Aldan" or "QA1" coilovers
(single adjustable)
Part#7065..............$195.00
QA1 (single)add........$215.00
Qa1 (double)add .......$355.00
**
OPTIONS:
Rear housing brace
Part#1030A....... $110
**
Fill and drain
Part#1005.......$68
**
***

**NEW**
2X4 REAR FRAME CLIP
with "Oval" crossmember included
Part#2040..starting at...$3758.00
(as shown below)
**Shown with our famous
"Pro-Street" ladder bars**

SMOOTH!!