Brackets
**
All of our brackets are
plasma cut and the holes
are drilled in precise
fixtures. No oversized
“laser” holes!
Competition 4-link (front bracket).
5/8″ holes, 21″ arc drilled.
Made from 3/16″ thick steel.
part #8005…..$29.95
******
Competition 4-link (axle) bracket
5/8″ holes, made from 3/16″ steel.
part #8006…..$27.95
**********
BRACKETS
Pro street “Ultimate II” (front)
4-link bracket,5/8″ holes, 18″
arc drilled. Made from 3/16″ steel.
part#8007…..$29.95
*********
Pro Street “Ultimate II” (axle)
bracket. 5/8″ holes, made from
3/16″ steel.
part#8008…..$27.95
*******
LOW PROFILE 4-LINK BRACKETS
Low Profile 4-link bracket.
5/8″ holes, 18″ arc drilled.
made from 3/16″ steel.
part#8009…..$29.95
******
Low Profile 4-Link (axle) bracket.
5/8″ holes, made from 3/16″ steel.
part#8010…..$27.95
*******
Ladder Bar (axle) bracket.
5/8″ holes, 7 1/2″
center to center, .213″
thick steel.
part#8012…..$15.95
3/4 hole part#8012a……$15.95
*******
Nostalgia Ladder Bar (axle) bracket.
5/8″ holes, 1/4″ thick steel.
part#8013…..$15.95
*******
Ladder Bar bracket (round x-member).
3/4 holes, .213 thick steel.
part#8018…..$16.95
******
Ladder Bar brackets (rectangle x-member).
3/4″ holes, .213 thick steel.
part#8019…..$16.95
*******
Ladder Bar bracket (jig welded kit).
3/4″hole,.213 thick steel.
part#8020…..$16.95
********
Front Ladder Bar Bracket (Jig Welded Clip)
Has 3/4″ Holes and is 1/4″ thick.
“This is the bracket we use in our 4×2 Ladder Bar
welded rear clips”
shown below.
Part # 8026…………………$21.95 ea
*******
Ladder Bar bracket (Flat 4×2 Crossmember)
3/4″ hole,….. .213 thick steel
part# 8021…..$16.95
********
Welded Series 7000 coilover upper
mount.
part#8024…..$31.95ea
*********
Welded Series 7000 coilver lower
zinc coated mount.
part#8025…..$50.95ea
*******
Std. Coilover Axle Bracket
4″ Adjustment, 1/4″ Thick
part #8014…..$18.95
***
Std. Coilover Axle Bracket
4″ Adjustment, 1/4″ Thick (WIDE)
part #8015…..$19.95
********
Coilover Axle Bracket
Long 6″ Adjustment,
1/4″ Thick (WIDE)
part #8017…..$21.95
**********
Std. Coilover Bracket
1/4″ Thick (USED WITH HOUSING BRACE)
part #8003…..$19.95
Long Coilover Bracket
1/4″ Thick (USED WITH HOUSING BRACE)
part #8004…..$21.95
********
NEW ….Long Coilover Bracket
1/4″ Thick …Used with 12 Bolt Chevy
or Dana 60 where NO housing brace is used.
approx…6″ adjustment
Part #8025…………….$21.95 ea
Below
*********
Coilover Bracket Tab (LEFT)
.213 / zinc plated ..part #8022…..$12.99
Coilover Bracket Tab (RIGHT)
.213 / zinc plated..part #8023…..$12.99
**********
“Low Slung” Wheelie bar
bracket made from 1/4″ steel
approx 9″ long with a
bolt center of 7 1/2″
Part #8011……$16.95
shown below
