Options for Roll Bars and Cages
(SHOWN ABOVE)
Typical side bar SB2 “option”
to clear stock door panel
for 6pnt & 8pnt roll bars
***
* SIDE BAR OPTIONS
* BACK BRACE OPTIONS
* UPGRADES
SB2 OPTION
(shown above)
** PURCHASED SEPARATELY…$78.82/pr.
SB3 OPTION
–Road Race side bar-
** PURCHASED WITH KIT…$29.95pr.
** PURCHASED SEPARATELY…$64.95/pr.
SB4 OPTION
** PURCHASED SEPARATELY…$73.95/side
than other types and will resist the tendency to shear the pin upon impact.
You need one kit per side bar!
SB5 OPTION
-“M” Bar side bar (easy entry)-
** PURCHASED WITH KIT…$49.95/pr.
** PURCHASED SEPARATELY…$84.95/pr.
SB6 OPTION
-X-Brace DOOR-
** PURCHASED WITH KIT…$59.95/pr.
** PURCHASED SEPARATELY…$69.60/pr.
**
Add to existing side bars.
Consists of 4 pieces, enough
to do both sides. Some
pre-notching already done!
SB7 OPTION
-“Helmet Bar” side bar (all out competition)-
** PURCHASED WITH KIT…$25.00
** PURCHASED SEPARATELY…$38.95
(pic same as above)
*one side notched.
Runs along the rocker panel,
from a-pillar to main hoop.
** PURCHASED SEPARATELY…$27.95
**SB9 OPTION…BENT “PICKUP” REAR BRACES.
Straight rear braces come standard
in our roll bar kits, but this
option makes installation of the
rear braces for pickup
trucks easier. It allows the rear
braces to exit the cab “straight out”
instead of at an angle for easier
installation.
**
When purchased with RB or RC kit……$44.95
When purchased separately………….$84.50
(shown below)
SB10 OPTION….X BRACE BEHIND DRIVER
Some of the pre-notching
already done!
Purchased with kit…..$74.00
purchased separately…$81.95
**
Full Size Trucks…….$84.50
BB2 NOTCHBACK OPTION
-Designed to clear back seat on certain cars-
** PURCHASED WITH KIT…$39.95
** PURCHASED SEPARATELY…$78.95
BB3 NOTCHBACK OPTION
-Designed to clear back seat on certain cars-
** PURCHASED WITH KIT…$39.95
** PURCHASED SEPARATELY…$78.95
BB4 HATCHBACK OPTION
-Designed to clear back seat on hatchback cars-
** PURCHASED WITH KIT…$39.95
** PURCHASED SEPARATELY…$78.95
(pre-fit tubing ends)
**
NOTE: With this option,
all possible places are
notched with the exception
that some have to be fitted
upon installation.
An additional…$20.00
***
Our standard roll cages are made
from the 1 5/8″ERW tubing. This
option is for some road course race
cars that do not require the DOM or
seamless tubing.
***
***
** For DOM tubing an additional cost
will be incurred.
approx. 35% lighter than
its mild steel counterpart,
and must be TIG WELDED!!
** 6 pt. roll bar…add $299.00
** 8 pt. roll bar…add $320.00
**10 pt. roll cage…add $430.00
**12 pt. roll cage…add $510.00
**14 pt. roll cage…add $575.00
These upgrades are used when
adding to your existing
roll bar that is already
welded in the car.
** 6 to 8 pt…(pre-notched)…$39.50
** 8 to 10 pt…$143.95
** 10 to 12 pt…$97.50
** 12 to 14 pt…$71.95
Each roll bar and cage kit
for uni-body cars come standard
with 6 (six) floor plates. BUT if you
want extra plates, they are available.
***
EXTRA 6″X6″ FLOOR PLATES
part#8021…floor plate..$4.50 ea
“NEW”***A-PILLAR BARS***
For many applications we have “BOTH”,the bars that
go “THROUGH” the Dash, and the bars that stand up BEHIND the Dash for easier Roll cage installation.
On a few applications there is an optional charge of $20 because of the complexity of the piece.
