.....PLUS OUR ROLL CAGE "FIT" IS SECOND TO NONE!! THAT'S WHY CUSTOMERS KEEP COMING BACK!!
All of our roll cage kits are made
a little LONG at the floor side (or open
end) of each tube. This gives
the installer some latitude so a
perfect fit is obtainable
for the shorter or taller drivers.
Prenotching is a $20 option.
We only prenotch up
to 8 point "roll bars" for
most applications. You
will have to do some fitting &
notching for "roll cages" to get
the best fit for the size
of the driver! Typically the
"Roof Hoop/Halo" and "A-pillar"
bars are not prefit!
*DIFFERENT RB & RC PRODUCTS (on this page)
*FUNNY CAR ADD-ON (on this page)
*ROLL BAR/CAGE SAFETY ITEMS (on this page)
Our Roll Bars and Roll Cages are made from the
finest hi-quality steel and are dimensionally
correct for NHRA and IHRA specs. They come
standard with tubing bent to fit perfectly for
each specific vehicle and model. And there are tons of applications to choose from!! ( Check out our product list) All necessary braces and floor plates are included!
4,6,8pnt-Roll Bars are made from
1-3/4" OD x .134 wall ERW tubing
10,12,14pnt&up-Roll Cages are made from
1-5/8" OD x .134 wall ERW tubing
-4130 Chromoly roll bars and cages
are made from 1 3/4" OD and
1 5/8" OD x .083 wall tubing respectively.
-DOM 1 5/8" OD and 1 3/4" x .120 wall
("drawn over mandrel")..mild
steel tubing available..
call for pricing.
NOTE: Chromoly tubing does NOT have a
At AUTO WELD, as with most of our products,
roll bars and cages are manufactured in-house to assure the best of quality. Shown below are just some of our roll bar hoops.
Example: This is how our Mustang
Convertible roll bar rear braces are
installed. Pictured a 1998 Cobra
*4 Point Roll Bar...
*6 Point Roll Bar...
*8 Point Roll Bar...
*10 Point Roll Cage...
*12 Point Roll Cage...
*14 Point Roll Cage...
NOTE: With the 14pnt...
a rear "X" brace is added
to the 12pnt roll cage as
Additional options shown above:
*Door (x) braces
Two types offered:
#6300, 6300CM/upper **
#6301, 6301CM /lower
**NOTE: #6300,#6300CM Inside side
bar attaches to seat brace
and right frame rail. **
**NOTE: #6301, #6301CM
the main bar turns back and
attaches to the seat brace instead
of going to the right side
...THREE WAYS TO ATTACH A ROLLCAGE
*PLATES & 2x3&2x4 OUTRIGGERS*
UNI-BODY CARS AND TRUCKS... 6"x6"
square plates are used and
"included standard" in roll bar
and roll cage kits.
FULL FRAME CARS AND TRUCKS
In cases where the main hoop is wider
than the frame (such as pickups) an
"Outrigger kit" is available below.
Used when installing a roll cage
or roll bar when the bottom of the
cage is wider than the frame...such
as a pickup truck.
*Consists of 4 pieces of 2x4x11ga
or 2x3x11ga box steel and 4 flat
pieces of steel to cap off the
ends. Cut at different lengths
for different vehicles!
Outriggers are welded to the sides
of the frame. These act as a
support for the roll cage.
(must specify when ordering)...$29.00
Note: "Full Frame" cars such as
1987 Monte Carlo...no plates are
provided. Cage is designed to weld
directly to the OE frame.
NOTE: Required when installing a 6 or 8 point roll bar.
Standard colors are RED, BLUE, or BLACK!!
-5 pt. Harness
-5 pcs. roll bar padding
-1 window net
-1 window "Deluxe" installation
kit (quick release)(shown below)
-4 mounting tabs
-4 grade 8 bolts and lock nuts
PART#6500...ROLL CAGE SAFETY KIT...$199.95
NOTE: Required when installing a roll cage 10 pt and up.
Standard colors are RED, BLUE, or BLAC
**PART#6505..5 POINT HARNESS only...$86.00
**PART#6506..ROLL BAR PADDING (3sections)...$15.00
NET INSTALLATION KIT
(description below) $63.00
Part#6521 (above picture)
is the slickest window
net mounting kit. It has 2 swivels
which allows a "one hand hook up"
while sitting in the car. The swivels
and cable let the window net
drop down behind the side bar
allowing the driver to get in
without the window net mechanism
getting in the way.
Does not include the window net.
***ROLL CAGE APPLICATION LIST***
GM***FORD***CHRYSLER ***IMPORTS STREET ROD***PICKUPS
If you don't see your application listed..chances are we can still do it for you!!!!!!!