Auto Weld builds all types of rear housings from full Competition cars to Pro Street to customer's specifications to special "shoot-out" cars. They are completely jig welded. Special fixtures allow us to put all brackets into alignment with the center section. They are offered as simple as a narrowed bar housing to a fully welded Competition rear housing, complete with brackets, brace, triangular support, fill and drain plugs, and made for the toughest applications and in any width, bolt circle, and brake register, (9" type only). AUTO WELD can build any housing in any stage of completion that you could possibly need.
MANY OPTIONS ARE AVAILABLE!

*HOUSING & AXLE COMBOS-MADE TO ORDER HOUSINGS-4-LINK HOUSINGS-LADDER BAR HOUSINGS-BRACE KITS-HOUSINGS BUILT TO SPEC-SPOOL COMBO-AXLES-HOUSING HARDWARE (ON THIS PAGE!!)


* BOLT-IN HOUSINGS
* REAR END PARTS

At AUTO WELD we use these New massive and thicker aftermarket 9" Ford housing cores. And also use the thicker and stronger 1/4" wall "DOM" tubing for the axle tubes. Shown below.

Above is an example of the differences between the smaller 3" diameter axle tubes and the stronger and larger 3 1/4" diameter axle tubes. Both used are the beefy 1/4" wall "DOM" steel tubing. Some applications may require using the smaller 3" axle tubes, but for most of our rears we use the stronger
3 1/4" axle tubes.

Here are a few tips so you can be prepared BEFORE you order!!

back to top

Don't let our "LOW PRICES" fool you!!
All of our rears are welded in special
fixtures for absolute accuracy.

100's SOLD

Auto Weld's Housing and Axle Combo is STILL the best buy in the U.S.A.!

Any width available!!


INCLUDES:
HOUSING, AXLES, BEARINGS, STUDS AND RETAINERS!! Discounted package price..$1034.00

FEATURES:

* NARROWED HOUSING WITH MOSER ENGINEERING RACING AXLES
**
* ANY WIDTH
**
* ANY SPLINE UP TO 35
(28,31,33,35 same price)
**
* 40 SPLINE AVAILABLE AT
AN ADDITIONAL $90.00
**
* ANY BOLT CIRCLE
(4 1/2", 4 3/4",5")
**
* SET UP FOR ANY 9"
BRAKE REGISTER

OPTIONS:

** AUTO WELD HOUSING & AXLE PKG. WITH BEARINGS, STUDS, RETAINERS COMBO
Part#1000........$1034.00 (SAVE)
**

** AXLE BEARINGS- 3" STUDS,
RETAINER PACKAGE
Part#1230........$99.00
**

** AXLE BEARINGS- 5/8 STUD
KIT, RETAINER PACKAGE
Part#1231........$160.00
**

** 40 SPLINE UPGRADE
MUST SPECIFY
...Additional $90.00
**

** (LABOR ONLY) TO WELD ALL
BRACKETS TO HOUSING 4-LINK &
LADDER BARS...$325.00

back to top

** 9" FORD (bare)HOUSING, ANY WIDTH,
Part#1015.......$605.00
**

** 9" FORD HOUSING,
WITH BRACE INSTALLED
Part#1018.......$715.00
**

NOTE: These prices only include up to 35 spline. 40 spline is available for 9" Fords for an additional $90.00

back to top

***
OPTION
***
FABRICATED 9" FORD housing can be added to any of the housings below as an option. They are 3/16"
thick with 1/4" thick axle tubes.
#F9 option...$300

PRO STREET 4-LINK HOUSING

COMPETITION 4-LINK HOUSING

** BRACE INSTALLED (PARTS & LABOR)
Part#1030A.......$110.00
**

** 4-LINK BRACKETS & SHOCK MOUNTS
INSTALLED (LABOR ONLY)
Part#1031........$325.00
**

** COMPETITION 4-LINK REAR PREP, INCLUDES:
FIXTURE WELDED REAR HOUSING,
4-LINK BRACKETS,SHOCK BRACKETS,& SUPPORT
BRACING, BRACE, AND DRAIN & FILL OPT.
When purchased with suspension kit
**
Part#1032-A.......$1034.00(discounted)
**
Purchased outright
Part#1032-B.......$1084.00(discounted)

back to top

"COMPETITION" LADDER BAR REAR HOUSING

** BRACE INSTALLED (PARTS & LABOR)
Part#1030.......$110.00
(Pictured below)
**

** LADDER BAR BRACKETS & SHOCK MOUNTS
INSTALLED (LABOR ONLY)
Part#1041.......$325.00
**

** COMPETITION (above) and PRO STREET (below)
LADDER BAR REAR PREP. INCLUDES:
REAR HOUSING, LADDER BAR BRACKETS, SHOCK BRACKETS, & SUPPORT BRACING, REAR BRACE,
AND DRAIN & FILL OPT.
**
When purchased with suspension kit
Part#1042-A.......$1034.00 (discounted)
**
Purchased outright
Part#1042-B.......$1084.00 (discounted)

ROUND TYPE "PRO STREET" HOUSING WITH BRACE

-------------------------------------------
**MUSTANG LADDER BAR HOUSING**
If you want dynamite traction on your stock body Mustang, this is the rear for you. Housing is already fixture welded with all the mounts to ensure proper alignment (when using stock frame rails). Order with our "Ladder Bar Suspension Kits" and "Extreme Duty Frame Connectors" and save! TRACTION NEVER FELT SO GOOD!!
**
PART#1464-A..MUSTANG LADDER BAR HOUSING..$$934.00
(when ordered with suspension kit)
**
PART#1464-B..OUTRIGHT.....................$985.00
(shown below)

back to top

** 9" BRACE KIT,FORD LEAF
part#1050...$65.00

** 9" BRACE KIT,
FORD COIL
part#1051...$65.00

** 9" BRACE KIT,
OLD STYLE
part#1052...$65.00

** 8-3/4" BRACE KIT, MOPAR
part#1053....$65.00

FULL STOCK LENGTH REAR BRACE
(such as stock length Mustang)
available at....$79.00

back to top

** NARROW A HOUSING
part#1003...$195
**
** NARROW A HOUSING AND
BLAST CLEAN TO BARE METAL,
READY FOR PAINT
part#1004...$295
**
** ADD FILL & DRAIN (FILL
CAP ALUMINUM)
part#1005...$68.00
**

** ADD BACK BRACE (MADE FROM
BOX TUBING)
part#1030A....$110.00
**
** ADD BRACE TO
STOCK LENGTH REARS
part#1030B....$125.00
**
** MOUNT 4-LINK BRACKETS AND SHOCK
MOUNTS (LABOR ONLY)
part#1031....$325
**

** MOUNT LADDER BAR BRACKETS AND SHOCK
MOUNTS (LABOR ONLY)
part#1041....$325
**

** LEAF SPRING PADS INSTALLED
(Ford and Mopar type)
part#1046....$55.00
**

** GM LEAF SPRING PADS
INSTALLED ("T" bolt.."mono"
and "multi-leaf" type)
part#1047...$85.00
**

back to top

AUTO WELD'S 9" HOUSING, RACE AXLE, AND SPOOL COMBO IS PRACTICALLY A STEAL!!
GET THIS SPECIAL DISCOUNT PRICE WHEN ORDERING HOUSING, AXLES, BEARINGS, STUDS,  RETAINERS, AND SPOOL.

**part#1055...$1142.00 (Discount!!)

back to top

Axle shown with the "Star Flange" and "Gun Drill" options.
**
**Star Flange Option...$85.00 per pair
**
**Gun Drill Option...$100 per pair
**

NHRA-IHRA LEGAL RACING AXLES

Special tempering makes them ideal for Pro Street also!

We like Moser Engineering Axles because they are super tough for  racing, they come with a fantastic warranty, and the hubs are tempered in such a way that you cansafely drive with them on the street.

** FORD 9"-28 SPLINE
part#1210...$360.00
**
** FORD 9"-31 SPLINE
part#1211...$360.00
**
** FORD 9"-33 SPLINE
part#1212...$360.00
**
** FORD 9"-35 SPLINE
part#1213...$360.00
**
** FORD 9"-40 SPLINE
part#1214...$450.00
**

** CHEVY 12 BOLT-30 SPLINE
part#1215...$360.00
**
** CHEVY 12 BOLT-33 SPLINE
part#1216...$360.00
**
** DANA 60-35 SPLINE
part#1217...$360.00
**
** MOPAR 8-3/4-30 SPLINE
part#1218...$360.00
**
** MOPAR 8-3/4-35 SPLINE
part#1219...$360.00
**

NOTE: YOU MUST SPECIFY THE LENGTH OF AXLES, BOLT CIRCLE, & BRAKE REGISTER. IF YOU NEED ASSISTANCE, AUTO WELD TECHS ARE ALWAYS AVAILABLE AND MORE THAN HAPPY TO HELP!!!

back to top

** AXLE BEARING- 3.150 END,
1.772 BORE (EACH)
Part#1220.......$34.95
**

** AXLE BEARING- 3.150 END,
1.531 BORE (EACH)
Part#1221.......$34.95
**

** AXLE BEARING- 3.150 END,
1.563 BORE (EACH)
Part#1222.......$34.95
**
** AXLE BEARING- SMALL FORD,
2.893 END,1.563 BORE (EACH)
Part#1223.......$34.95
**
** AXLE BEARING- SMALL FORD,
2.893 END,1.378 BORE (EACH)
Part#1224.......$34.95
**
** AXLE BEARING- SMALL FORD,
2.893 END,1.531 BORE (EACH)
Part#1225.......$34.95
**
** AXLE BEARING- GM C-CLIP ELIMINATOR
USING STOCK AXLES
Part#1226.......$160.00
Above with axle studs..$170.00
**
** AXLE BEARING- MOPAR, 1.562 BORE
WITH RETAINER PLATE
Part#1227.......$34.95
**

** BIG FORD BEARING RETAINER PLATE
(PIECE), NEW STYLE 3/8" HOLES
Part#1228.......$8.00
(shown above)
**

** BIG FORD BEARING RETAINER PLATE
(PIECE), OLD STYLE 1/2" HOLES
Part#1229.......$8.00
**

** AXLE BEARINGS, 1/2" X 3" STUDS,
RETAINER PKG
Part#1230.......$99.00
(shown above)
**

** AXLE BEARINGS, 5/8" STUDS,
RETAINER PKG
Part#1231.......$160.00
**

NOTE: ( BSR pkg )includes:
1pr AXLE BEARINGS,1/2"x 3" drag legal AXLE STUDS, and 1pr axle RETAINERS
Only...........$99.00
when purchased with axles!

back to top

IF YOU WANT KILLER STRENGTH IN YOUR WHEEL STUDS, THIS IS THE KIT FOR YOU!!

** PRESS-IN STUD KIT, 1/2x20x3,
.615 KNURL
Part#1232.......$27.95

** PRESS-IN STUD KIT, 7/16x3,
.480 KNURL
Part#1233.......$27.95

** PRESS-IN STUD KIT, 1/2x20x3,
PACK OF 10
Part#1234.......$27.95

** 5/8" STUD KIT
Part#1235.......$83.00
(bottom picture above)

back to top

back to top